Innerspring Vs Memory Foam Vs Hybrid Mattress

Mattresses23 min read Updated November 6, 2026
Written by Chinmay Shankar

Last Updated November 6, 2026

Innerspring, memory foam, latex or hybrid? The four main mattress types are built very differently, so they feel different when you lie down, move differently when your partner rolls over, and hold heat differently through the night. If you're shopping for a new bed, knowing how each one works makes the choice much easier.

This guide compares all four side by side, then takes a closer look at hybrid mattresses: what they are, how they differ from innerspring and memory foam, their pros and cons, who they suit, how to choose one, which base to put it on, how long it may last and what drives the price.

Quick answer

Innerspring mattresses use connected steel coils under a thin comfort layer, so they feel bouncy, airy and on the firmer side, and they're usually the most budget-friendly. Memory foam contours slowly and closely and absorbs motion very well, but it can feel warm and softer at the edges. Latex contours too, with a buoyant, springy feel and good airflow. A hybrid puts at least 2 inches of foam or latex over pocket coils, so you get cushioning plus bounce, airflow and firmer edges. Pick the feel you like first, then choose firmness by body weight and sleep position.

Key Takeaways:

  • Innerspring mattresses have interconnected coils (Bonnell, offset or continuous wire) and less than about 2 inches of comfort padding. They're bouncy and breathable but pass more motion across the bed.
  • Memory foam mattresses have no coils. They give a slow, body-hugging sink and excellent motion isolation, but traditional memory foam can hold body heat and the edges are usually softer.
  • Latex mattresses contour and spring back right away, so you rest "on" the bed rather than "in" it. Latex is breathable and known for lasting a long time, and it usually costs more.
  • Hybrid mattresses combine a pocketed coil support core with comfort layers of memory foam or latex, usually 2 inches or more. They sit between innerspring and foam for feel, with good airflow and edge support.
  • Choose firmness by body weight and sleep position: lighter sleepers usually go softer, heavier sleepers (over about 230 lbs) firmer and thicker.
  • Put a hybrid on a solid platform or a slatted base rather than an old box spring, and check the trial, warranty and what each layer is made of before you buy.
Comparison graphic showing innerspring vs. memory foam vs. hybrid mattress cross-sections side by side.
Innerspring, memory foam and hybrid mattresses are built from different layers, so each one feels different.

Innerspring vs. Memory Foam vs. Latex vs. Hybrid: At a Glance

Before we dig into hybrids, here's what each of the four main mattress types is and how they compare. These are general traits. Individual mattresses vary a lot with their materials, firmness and build quality.

Innerspring

A core of steel coils linked together with wire, topped with a thin layer of foam, fiber or cotton padding. The classic, springy mattress feel.

Memory foam

Layers of viscoelastic polyurethane foam that soften with body heat and pressure, with a firmer foam base. No coils.

Latex

Layers of latex foam, made with the Dunlop or Talalay process, from natural rubber, synthetic rubber or a blend. No coils in an all-latex mattress.

Hybrid

Individually pocketed coils as the support core, under comfort layers of memory foam, latex, polyfoam, wool or cotton.

Illustration of four mattress types: latex, memory foam, hybrid, and innerspring, each shown with cross-section.
Latex, memory foam, hybrid and innerspring mattresses, shown in cross-section.
Feature Innerspring Memory foam Latex Hybrid
Feel Bouncy, firmer, "on top" of the bed Slow, deep, body-hugging sink Buoyant and responsive; contours, then springs back Cushioned top with coil bounce underneath
Support From the coil unit; thin padding on top From a dense foam base From firmer latex layers From pocket coils, often zoned or reinforced
Motion isolation Low; connected coils pass movement along Very good Good Good; pocket coils move on their own
Temperature Airy; lots of space between coils Can feel warm; gel and open-cell foams are designed to run cooler Breathable, especially perforated latex Airy coil core; depends on the comfort layer
Edge support Often firm, depending on the border Usually softer at the edges Fairly firm thanks to the dense material Usually strong, especially with reinforced perimeter coils
Ease of movement Easy Harder; you sink in Easy Easy
Noise Coils can creak with age Silent Silent Mostly quiet
Weight Lighter Medium Heavy Heavy
Durability Varies; thin padding can wear sooner Varies with foam density Often among the longest-lasting Varies with coil and comfort-layer quality
What drives the price Usually the most affordable type Foam density and number of layers Natural vs. synthetic latex, certifications, thickness Coil type and count, comfort-layer materials, thickness
Often suits Budget buyers, guest rooms, people who like bounce Side sleepers who love a hug, light sleepers with restless partners Sleepers who want contouring without sinking, warm sleepers Couples, combination sleepers, heavier sleepers, warm sleepers
Good to know

Two mattresses of the same type can feel completely different. Firmness, thickness and the quality of each layer matter as much as the type. Our mattress firmness scale and mattress thickness guide help with those choices.

What Is a Hybrid Mattress?

A hybrid mattress combines a coil support core, like an innerspring, with comfort layers of foam or latex, like a foam mattress. The idea is to get the sturdy, bouncy support of springs with the cushioning and contouring of foam or latex on top.

Why "hybrid"? The name is partly a marketing term, and there's no single industry definition. In practice, most hybrids share three things: a core of individually pocketed coils, a comfort layer of at least 2 inches of foam or latex, and a cover. Many also add a transition layer, and some use natural fibers such as cotton, wool or cashmere in the cover and padding.

Comfort layer

Memory foam, latex, polyfoam or fiber on top. It sets the first feel of the bed and cushions your shoulders and hips.

Transition layer

An optional, firmer layer in the middle that smooths the step from the soft top to the coils, so you don't feel the springs.

Support core

Pocketed coils that carry most of your weight and give the mattress its bounce and airflow.

Let's look at how hybrids differ from traditional mattresses, and what they can and can't do for a good night's sleep.

How Does a Hybrid Mattress Differ From a Regular Innerspring Mattress?

Before memory foam and hybrid mattresses became popular, the regular innerspring mattress was what most people slept on. Innersprings tend to be firmer and bouncier, with a thin layer of padding over the coils. Hybrids keep the coils but switch to pocketed coils and add a much thicker comfort layer, mainly to cushion pressure points and cut down on motion transfer.

Feature Hybrid mattress Innerspring mattress
Comfort layer At least 2 inches of memory foam or latex, so it's deeper and more cushioned, which many side sleepers like Usually less than 2 inches of cotton, fiber or polyfoam, for a firmer surface that many stomach and back sleepers like
Coils Pocketed coils, each in its own fabric sleeve, moving independently Interconnected coils (Bonnell, offset or continuous wire) that move together
Motion transfer Lower: pocket coils and thick comfort layers absorb movement Higher: movement travels across the connected coils
Feel Contouring on top, with some bounce Springy and bouncy, "on top" of the bed
Flipping Usually one-sided, built top to bottom, so you rotate it rather than flip it Some are two-sided and flippable; many modern ones are one-sided
Weight Heavier, because of the extra layers Lighter, so easier to move if you relocate often
Price Usually more Usually less

How long an innerspring lasts varies with its coils and padding. Estimates of around 7 to 8 years with good care are common, but the thin comfort layer on top is often what wears first. A mattress topper can add cushioning to an innerspring that's still supportive.

Tip

Shopping for a traditional innerspring? Look at the coil count and coil type, not just the price. Some "innerspring" mattresses use pocket springs instead of connected coils; they usually cost a little more but pass along less motion. Innersprings can suit people who like a firmer, bouncier, airy bed.

A hybrid, on the other hand, gives you more choice in feel, from medium soft to firm, while keeping some of the bounce of springs and absorbing more motion. Our guide to pocket coils vs. traditional Bonnell innersprings explains the coil difference in more detail.


What Is the Difference Between a Hybrid Mattress and a Traditional Memory Foam Mattress?

If you remember the memory foam TV commercials of years past, two things stood out: the slowly vanishing handprint and the promise of a "cloud-like" feel. Memory foam still has plenty of fans. So how does it compare with a hybrid?

Both have thick comfort layers, both limit motion and both cushion pressure points, so the choice mostly comes down to feel. A memory foam mattress is made of viscoelastic polyurethane foam that softens and conforms under pressure and body heat. Many have an open-cell structure or are infused with gel, copper or graphite to move heat away. They have a firmer foam support core but no springs, which is where that slow, sinking feel comes from.

Feature Hybrid mattress Memory foam mattress
Support core Pocketed coils, often with reinforced edges High-density foam; no coils
Feel More bounce, less sinkage; easy to change position Soft, slow, hugging feel that many side sleepers love
Motion isolation Good Excellent, and very quiet
Edge support Usually firmer, especially with perimeter coils Usually softer at the edges
Temperature Airflow through the coil core helps it sleep cooler Traditional memory foam can hold body heat; gel and open-cell foams are designed to run cooler
Weight and handling Heavier and harder to move Lighter than most hybrids
Price Usually more, depending on coils and comfort layers Often more affordable, depending on foam density

A hybrid often suits people who want more bounce, edge support and airflow, while memory foam suits people who love a deep, quiet hug. If you like the contouring of foam but find memory foam too warm or too slow, latex is worth a look; see our comparison of latex vs. memory foam.

Where does an all-latex mattress fit?

An all-latex mattress has no coils. Its support comes from firmer latex layers, with softer latex on top. It contours like foam but pushes back right away, so many people describe it as buoyant. Latex is breathable, quiet and known for its durability, and it's heavy. Natural latex mattresses usually cost more than memory foam, and the price depends on whether the latex is natural, synthetic or blended. Our guide to latex vs. hybrid mattresses compares the two directly.

What Are the Pros and Cons of a Hybrid Mattress?

Because "hybrid" is more of a marketing term than a strict category, hybrids vary a lot. A good one has a generous comfort layer, a well-made coil unit and quality materials throughout. Still, no mattress does everything, so here's what a hybrid does well and where it falls short.

Pros of a hybrid mattress
  • A balanced feel: not as bouncy as an innerspring, not as squishy as memory foam.
  • Cushioning plus support: the comfort layer contours to your shoulders and hips while the coils hold you up, so it works for many side, back, stomach and combination sleepers.
  • Airflow: the open coil core lets air move, which many warm sleepers like.
  • Motion isolation: pocket coils move independently, so a restless partner disturbs you less than on an innerspring.
  • Edge support: reinforced perimeter coils make the edges easier to sit on.
  • Easy to move on: the bounce makes it easy to change position and get out of bed.
Cons of a hybrid mattress
  • Cost: more materials usually mean a higher price than innerspring or basic foam.
  • Too many options: foams, latex, coils and fibers can be mixed in many ways, so it can be hard to tell what you're buying.
  • Less bounce than an innerspring: if you love a springy bed, a hybrid may feel more muted.
  • Heavy: harder to move, rotate or carry upstairs.
  • Possible noise with age: coils can creak if they wear or bend, though pocket coils are usually quiet.
  • Usually one-sided: you can rotate it, but most can't be flipped.

Who Needs a Hybrid Mattress?

A hybrid isn't the right bed for everyone. It's worth understanding what it does well before you buy, especially because quality varies so much between products sold under the "hybrid" name. A hybrid is often a good fit if you're one of these sleepers:

Warm sleepers

If you tend to sleep hot, look for a hybrid with a latex comfort layer (ideally perforated) and a roomy pocket coil core. That combination lets more air move through the mattress.

Heavier sleepers

The coil core adds support and the edges hold up better than soft foam. If you weigh over about 230 lbs, look for a firmer feel, a thicker mattress and reinforced edges. See our mattresses for heavier sleepers.

Couples and combination sleepers

Hybrids absorb more motion than innersprings and are easier to move on than memory foam, which helps if you change position at night or share the bed.

People who want a mix

Hybrids come with different coil gauges, coil counts, zoning and comfort layers, including versions made with certified organic materials, so you can find a combination that suits you.

Might prefer something else

If you love a deep, slow sink, memory foam may suit you better. If you want the longest-lasting materials and a buoyant feel with no coils, consider all-latex. If you're on a tight budget or setting up a guest room, a good innerspring may be enough.


How Do I Choose a Hybrid Mattress?

With so much mattress marketing around, it pays to know what to look for. Foams, coils and layers together make a hybrid what it is, so check each part.

  1. Check the comfort layer

    The comfort layer on top largely decides how soft or firm the mattress feels. Too thin and the surface feels hard; too thick and you sink in, which can make getting out of bed harder. Look for at least 2 inches of foam or latex over the coils.

  2. Choose the comfort material

    Latex feels buoyant and breathable, memory foam slow and hugging, and polyfoam somewhere in between. If you prefer foam and sleep warm, open-cell or gel memory foam is designed to spread and release body heat.

  3. Look for pocketed coils

    Pocketed coils sit in their own fabric sleeves and move independently. That reduces motion transfer, lets the core respond to your body and keeps air moving through the mattress.

  4. Pick the firmness for your body

    Soft mattresses don't suit everyone. Heavier and stomach sleepers usually need a firmer surface so the hips don't sink too far. A medium to medium-firm mattress is a common starting point for many back, side and combination sleepers; go a step softer if you weigh under about 130 lbs, and a step firmer if you weigh over about 230 lbs.

  5. Check the edges, trial and warranty

    Sit on the edge if you can, or look for reinforced perimeter coils. Then read the fine print: how long the home trial is, what the return rules are, and what the warranty covers and requires.

What Are the Other Features of a Good Hybrid Mattress?

1. Quality materials: coil types and foam construction

The coil unit and the foams or latex on top decide how a hybrid feels and how well it holds up. Here are the main coil types you'll see.

Coil type How it's built Where you'll find it
Pocketed coils Each cylindrical coil sewn or sealed in its own fabric pocket, moving independently Most hybrids
Bonnell coils Hourglass-shaped open coils linked with spiral wire Traditional innersprings; some budget hybrids
Offset coils Hourglass coils with flattened tops and bottoms, hinged together Mainly innersprings
Continuous wire coils Rows of coils formed from one long wire Budget innersprings

Pocketed coils are individually wrapped and independent of each other. Because each one compresses on its own, they give better motion isolation, contour more closely and make less noise than connected coils. They can add to the cost, so it's worth checking the coil count and gauge.

400-1,000+Coil counts often suggested for a queen hybrid; kings run higher
Lower gaugeThicker wire, so a firmer coil
12-16Typical gauge range for mattress coils
2"+Comfort layer to look for on top

More coils can add support and motion control, though past a point the comfort layers and coil quality matter more than the raw number. Coil gauge is the thickness of the wire: a lower number means thicker, firmer wire, so a 13.5 gauge coil feels firmer than a 15.5 gauge coil. Some units use a firmer gauge around the edges for better edge support. Like any mattress, a worn coil unit can develop soft spots over time, so check what the warranty says about sagging and body impressions.

Open coils are the other family. They're mainly found in traditional innersprings:

Single hourglass-shaped Bonnell steel coil spring on a white background.

Bonnell coils

The classic open coil of traditional innersprings. Some hybrids use them under the comfort layers, but most use pocketed coils for better motion isolation.

Navy line drawing of continuous wire coils.

Continuous wire coils

Made from one long wire, so they're affordable and give consistent support. They contour less than other coils and pass along more motion, so good hybrids rarely use them.

Row of six offset coils with circular metal rims at top and bottom, showing how innerspring mattress coils are built.

Offset coils

An upgrade on Bonnell coils, with flattened tops and bottoms that hinge together. They contour and isolate motion a little better, and you'll mostly find them in innersprings.

The foam construction on top matters just as much as the coils:

Latex foam

A popular comfort layer in hybrids. It suits active and warm sleepers, because it's bouncy, breathable and durable. Natural latex costs more than foam, but it's known for lasting a long time. Our guide to Dunlop vs. Talalay latex explains the two types.

Memory foam

Forms the comfort layer in many hybrids. It contours to the body and absorbs surface motion, while the pocket coils and transition layer underneath keep the bed supportive and add airflow.

Polyfoam

Usually found in the transition layer. It comes in low and high density; high-density polyfoam holds up better and takes some load off the coils without adding much cost.

2. Strong edge support

A mattress isn't just for sleeping. You sit on it to put on shoes, read or watch TV, and you get in and out of it every day. Strong edge support means the edge doesn't collapse when you sit there, and it gives you more usable sleeping surface. It matters most for couples, heavier sleepers and anyone who finds getting out of bed harder. Memory foam edges tend to compress the most; hybrids usually do best.

Edge method How it works Keep in mind
Reinforced perimeter coils A row of firmer, lower-gauge coils around the sides Feels the most like the rest of the bed
Foam encasement A firm foam border around the coil unit Firm at first; depends on the foam quality
Steel border rod A steel rod around the top and bottom of the coils Inexpensive and firm; can bend over time

Many good hybrids combine perimeter coils with a foam or latex border for a stable edge that keeps the mattress in shape.

3. Motion transfer

Motion transfer is how much you feel your partner move. Mattresses with latex or memory foam layers absorb motion well, and memory foam absorbs it best. Innersprings pass along the most, because their coils are connected.

A hybrid sits in between. The foam or latex on top absorbs surface movement, and pocket coils compress independently, so one partner can turn over or get up without bouncing the other. It's also easier to move on than memory foam, which some people find hard to get out of.

4. Temperature regulation

Airflow is one reason hybrids became so popular. Memory foam can feel warm, and an innerspring is airy but has little cushioning. A hybrid's coil core lets air circulate under the comfort layers.

The comfort layer still matters. Traditional viscoelastic memory foam can hold heat even on coils, so if you sleep warm, look for natural latex, ideally perforated, or a gel or open-cell foam. Breathable fabrics like organic cotton and wool in the cover help too. Put the mattress on a slatted or open platform base so air can reach the underside. For more ideas, see how to sleep cool at night.

5. Pressure relief

A well-designed hybrid cushions the pressure points that press hardest into a mattress, usually the shoulders and hips. The comfort layer contours to your shape, and the coils underneath keep you from sinking too far.

Watch out for hybrids with a thin or low-density comfort layer, which can wear quickly. Look at the full stack: a comfort layer that contours, a transition layer if there is one, and a coil core firm enough for your weight.

6. Body weight and sleeping position

Body weight and sleeping position are two of the biggest factors in choosing a mattress. Use this chart as a starting point; personal preference always wins.

Sleep position What you usually want Mattress types to consider
Side Cushioning at the shoulders and hips; often medium-soft to medium Memory foam, latex, or a hybrid with a generous comfort layer
Back Even support that keeps the hips from sinking; often medium to medium-firm Hybrid, latex or a firmer innerspring
Stomach A firmer surface; often medium-firm to firm Hybrid with a thinner comfort layer, firm latex or innerspring
Combination A responsive surface that's easy to move on; often medium-firm Hybrid or latex

Side sleepers usually like a softer surface, such as memory foam or a pillow top. A hybrid with a memory foam or latex comfort layer works well too. If you want something more responsive, with a balance of contouring and spring, look at an all-latex mattress or a latex hybrid. Latex also tends to have firmer edges than memory foam and is quieter than an innerspring. When you buy natural latex, check for a GOLS (Global Organic Latex Standard) certificate. Topping up an existing bed instead? See our toppers for side sleepers.

Back sleepers usually do well on a medium to medium-firm mattress that holds the lower back without pushing back too hard. A hybrid with pocketed coils and a firm, high-density comfort layer is a good fit.

Stomach sleepers generally want a firmer bed, so the midsection doesn't sink and arch the lower back. A firm mattress, such as a hybrid with strong coils and a thinner comfort layer, suits them; soft, squishy beds usually don't. Many stomach sleepers also prefer a thin pillow.

Combination sleepers change position through the night, so a medium-firm hybrid or latex mattress that's easy to move on is a good starting point.

Body weight changes how deeply you press into a mattress. Under about 130 lbs, a medium-firm mattress feels firmer to you, so you may want a step softer. Over about 230 lbs, look for a firmer feel and a thicker mattress, around 12 inches or more, with strong edges. Every mattress maker sets its own weight guidance, so check it for the mattress you're considering.

Tip

Sharing the bed with someone who weighs more or sleeps differently? Choose for the heavier partner, or pick a split king so each side can have its own firmness. A hybrid's motion isolation also helps when one partner moves a lot.

Hybrid mattress sizes

Now that you know what makes a good hybrid, which size should you start with? Here's a quick look at the standard US sizes. For more, see our mattress sizes and dimensions chart.

Size Dimensions Good for
California king 72 x 84 inches Tall sleepers; couples who want extra length
King 76 x 80 inches The widest standard size; couples, and families who share the bed with kids or pets
Queen 60 x 80 inches Couples, single adults who want room, most main bedrooms
Full 54 x 75 inches Single adults, teens, guest rooms; snug for couples
Twin XL 38 x 80 inches Tall teens, dorms, guest rooms
Twin 38 x 75 inches Children, bunk beds, small rooms around 7 x 10 feet

Shopping for a child? A twin mattress suits growing kids and fits most bunk beds; check the bed's maximum mattress thickness first.

What Type of Foundation Is Suitable for Hybrid Mattresses?

Hybrids are heavy. Coils, comfort layers and fibers add up, so expect some lifting when you set one up. More importantly, the base under your mattress carries that weight every night, so it needs to be sturdy and even.

Top view of a wooden slatted bed base with evenly spaced slats and a center support bar for mattress support.
A sturdy slatted base with a center support works well under a hybrid.

Platform bed

A frame with a solid deck or closely spaced slats. Easy and stable. Pick a height that lets you sit on the edge with your feet flat on the floor.

Slatted foundation

A metal or wooden frame with evenly spaced slats and a center support on larger sizes. Slats close together give even support and let air reach the underside.

Adjustable base

Most pocket coil hybrids flex with an adjustable base. Check that the mattress maker approves it for your model.

Box spring

Usually not recommended. An old box spring's springs aren't designed to carry a heavy hybrid, and many mattress makers advise against it. Box springs are mainly made for traditional innersprings.

For Turmerry's DIY Hybrid and latex mattresses, we recommend a platform frame or slatted base with slats no more than 3 inches apart, rather than a box spring. Not sure about yours? Read do you need a box spring.

How Long Do Hybrid Mattresses Last?

A hybrid mattress is often estimated to last around 7 to 10 years, and some makers expect longer with good care and quality materials. There's no fixed number, though. How long any mattress lasts depends on the materials, the weight it carries, how it's used and how it's cared for.

What helps it last What shortens its life
Latex or high-density foam comfort layers Thin or low-density comfort foam
A well-made pocket coil unit with reinforced edges Weak edges, or coils that are too light for the sleeper's weight
A firmness and thickness matched to your body weight A mattress too soft or thin for the weight it carries
A sturdy, even base and a waterproof protector A sagging base, spills and dampness
Rotating it head to foot every few months Sleeping in the same spot without rotating

Most hybrids are one-sided, with the comfort layers on top, so rotate them rather than flip them. Follow the maker's care instructions, because the warranty may depend on them. For example, Turmerry's mattress warranty requires a waterproof mattress protector from day one, and it doesn't cover stains, spills, dampness or mold; see our warranty page. An organic cotton waterproof mattress protector covers that.

Think of a mattress as an investment in your sleep. If it lasts longer than you expected, that's a bonus. Next, let's look at what affects the price.

How Much Does a Hybrid Mattress Cost?

Hybrids usually cost more than innerspring and basic memory foam mattresses, because they combine coils with thicker comfort layers. Prices vary widely by brand, size and season, so instead of a number, here's what moves the price up or down.

Comfort-layer materials

Natural latex and high-density foams cost more than basic polyfoam. Certified organic latex, cotton and wool add to the cost too.

Coils

More coils, zoned units and reinforced edges usually raise the price, along with the support and motion control they add.

Thickness and layers

Each extra layer adds material. A 12-inch hybrid usually costs more than a 10-inch version of the same mattress.

Size and features

Bigger sizes cost more, and features like zippered covers, swappable layers or split firmness can too.

Compare what's inside, not just the price tag, and look at the trial and warranty you get for your money. Our guide to how much a mattress costs explains what you can expect at each level.


Turmerry's Hybrid and Latex Mattress Options

If you're leaning toward a hybrid or a latex mattress, here's how Turmerry's options compare. Each one is described on its product page in full.

Mattress Type What's inside Good fit for
Organic Latex Hybrid Mattress Hybrid, 11 inches, medium 2" FSC-certified Talalay latex over 8" Leggett & Platt pocket coils (up to 958 coils) with reinforced edges, organic New Zealand wool and a GOTS-certified organic cotton cover Couples and combination sleepers who want a one-piece hybrid
DIY Hybrid Mattress With Latex Hybrid, 10 or 12 inches An 8" QuadCoil pocket coil unit under one or two 2" layers of GOLS-certified organic Dunlop latex, in Soft, Medium, Firm or Extra Firm, inside a zippered organic cotton cover Sleepers who want coil bounce with a latex feel they can change later
7 Zone Organic Latex Mattress All-latex, 7, 10 or 12 inches Separate layers of 7-zone GOLS-certified organic Dunlop latex inside a zippered organic cotton cover Sleepers who want latex all the way through, in a firmness from Soft to Extra Firm
Bigg+ Natural Latex Mattress All-latex, 12 inches Four 3" latex layers: three Extra Firm, plus a Medium Firm, Firm or Extra Firm top Sleepers over about 230 lbs

Our all-latex mattresses and the DIY Hybrid use GOLS-certified organic Dunlop latex. The Organic Latex Hybrid is the exception: its Talalay latex is FSC certified, not GOLS, and its cover is GOTS-certified organic cotton. It's one piece and is rotated, not flipped. The DIY Hybrid and our all-latex mattresses are separate layers inside a zippered cover, so you can unzip it, see the layers and rearrange or swap them.

Good to know

Every Turmerry mattress comes with a 120-night trial (sleep on it at least 30 nights first) and free shipping in the contiguous US, and most orders ship the same business day from Charlotte, NC. Sleep Foundation named our all-latex Dual Side Flippable "Best Mattress for Pressure Relief" in 2026, with an 8.9/10 score. Sleep Foundation may have an affiliate relationship with Turmerry.

Are Hybrid Mattresses Worth the Money?

Hybrids sit between a firm, bouncy innerspring and a soft, hugging memory foam mattress, and for many sleepers that middle ground is exactly right. They give you variety: you can choose the comfort material, the number of layers, the coil type and strength, and the firmness. If you want cushioning, bounce, airflow and firm edges in one bed, a well-made hybrid is usually worth it. If you love a deep sink, or you're furnishing a guest room on a budget, another type may suit you better.

Before you buy, keep these points in mind:

  1. Consider natural latex

    A hybrid with a natural latex comfort layer has more bounce than memory foam and is known for its durability. Check whether the latex is perforated, which helps air move. For organic latex, look for a GOLS certificate; our guide to synthetic vs. natural latex explains what to ask.

  2. Know what's in every layer

    Ask what each layer is made of, how the layers are held together (glued, sewn or zipped) and which certifications cover which parts. GOLS covers organic latex, GOTS covers organic textiles like cotton and wool, and foams may carry certifications such as CertiPUR-US. Look up any certificate number with the certifier.

  3. Look at natural fibers

    Organic cotton covers are soft and breathable, and wool helps regulate temperature through the seasons. Many makers, Turmerry included, use wool as the mattress's fire barrier.

  4. Buy with a real trial

    Your body needs a few weeks to adjust to a new mattress, so choose a seller with a home trial of at least a few months and a clear warranty. Here's how to break in a new mattress.

Want help choosing? Read our guide to how to choose a mattress, browse our hybrid mattresses, or call us at 984-299-6850 with any questions about what's inside our mattresses.

Frequently Asked Questions

Early Access Black Friday Sale: 20% off7 Zone Organic Latex Mattress

$719.20 $899.00From, with BF20

Shop now

Shop what's in this guide

Starting prices. Sale codes BF20 and BF15 are added at checkout.

Disclaimer: What is said in this article has been referenced from multiple sources and is intended only for educational and informational purposes. Please note that no content in this article is a substitute for professional advice from a qualified doctor or healthcare provider. Always consult an experienced doctor with any concerns you may have regarding a health condition or treatment, and never disregard any medical suggestions or delay in seeking treatment because of something you read here.