No Products in the Cart
Mohammed Aftab is a seasoned writer with a background in Journalism and an expertise spanning sleep, health, wellness, mattresses, bedding, and sustainable living, built through years of in-depth research. Read more
Last Updated November 4, 2026
Bed height is easy to overlook, but you feel it every day. It decides how easily you sit down on the edge of the bed and stand back up, how much storage fits underneath, how well the bed suits the room and how deep your fitted sheets need to be. This guide explains what bed height is, how to find the right height for you, how a mattress, base and topper add up, and how different bed frames change the final number.
Most beds are about 16 to 25 inches from the floor to the top of the mattress, and around 25 inches is often quoted as standard. The right height for you is the one where you can sit on the edge with your feet flat on the floor and your knees about level with your hips. Shorter sleepers usually land near the low end, taller sleepers near the high end. To get there, add up your frame or base, your mattress (often 7 to 12 inches) and any topper (usually 2 to 4 inches).

There's no single "correct" bed height, because it depends on your body, who shares the bed and how you use the room. The good news is that it's easy to test and easy to adjust, and the sections below show you how.
Key Takeaways:
Bed height is the total height of your bed from the floor to the top of your mattress. It adds together everything in the stack: the bed frame or base, a foundation if you use one, the mattress and any mattress topper.
An average bed for an average adult is often said to be about 25 inches tall, but plenty of comfortable beds are lower. What suits you mostly comes down to the length of your lower legs, which is why the range runs from about 16 inches for some people to 25 inches or a little more for others.
| Part of the bed | Typical height | Notes |
|---|---|---|
| Bed frame or base | About 4 to 18 inches | Low platforms sit close to the floor; frames with tall legs or storage sit higher |
| Foundation | 0 to about 9 inches | Many platform frames and adjustable bases don't need one |
| Mattress | About 7 to 14 inches | Most adult mattresses are 8 to 12 inches; see our mattress thickness guide |
| Topper | About 2 to 4 inches | Optional; it adds its full thickness to the bed |
Hold a tape measure straight up beside the bed and read the height at the top edge of the mattress, including any topper.
Measure at the head, middle and foot on both sides. Floors and older mattresses aren't always even.
Sit on a chair with your feet flat and your knees bent at about a right angle. The distance from the floor to the back of your knee is a good target for the top of your mattress.
Sit on the edge of the bed. If your feet rest flat and your knees are about level with your hips, the height suits you. If your knees rise well above your hips, the bed is low; if your feet dangle, it's high.
Sit near the edge of the mattress, where you actually get in and out, not in the middle. A softer mattress or topper sinks a little when you sit on it, so the height you feel can be an inch or so lower than the height you measure.
Bed height affects a few everyday parts of life in the bedroom:
You sit down on your bed and stand up from it at least twice a day. A very low bed takes more effort to stand up from, because you start with your knees bent sharply and have to push up further. A very high bed can leave your feet dangling, so you have to climb up or slide down. A bed at the right height lets you sit and stand smoothly, with your feet on the floor.
That matters even more as we get older, or for anyone whose mobility is limited, because a height that's slightly off becomes more noticeable. If that's you, get advice from your doctor or an occupational therapist on the height that's easiest for you.
For young children, a low bed is easy to climb in and out of on their own, and it's a short distance down if they roll toward the edge. For restless sleepers and anyone who gets up in the night, a bed at a comfortable height makes those trips easier. A lower bed won't remove every risk, but a height that suits the sleeper makes everyday use simpler.
Most of us want our bedroom to feel like a calm place to come home to, and the bed is the biggest piece of furniture in it. Your bed's height shapes the look of the whole room. A low platform bed suits a minimal, modern room and makes a small room feel more open. A taller bed with a headboard and footboard looks more traditional and works well in a large room or under high ceilings.
The space under the bed is useful storage, especially in a small home. Taller beds leave room underneath for boxes, suitcases and storage bins, while low beds leave little or none. For example, Turmerry's Wooden Bed Frame has about 8 inches of clearance under the rails, and the Platform Base lets you add leg sections for more space below.
If you live in a small apartment, every bit of storage counts, so a slightly taller bed can save you a dresser or a closet shelf.
Bed height is a personal choice. Around 25 inches is often called the "standard" bed height, but it won't suit everyone. Start with the edge test, then think through the factors below.
As a rough starting point, here's where many people end up by height. Your own leg length, your mattress feel and the sit test matter more than this chart.
| Your height | Bed height to try (floor to top of mattress) |
|---|---|
| Under about 5'3" | About 16 to 20 inches |
| About 5'3" to 5'9" | About 19 to 23 inches |
| About 5'10" to 6'2" | About 22 to 25 inches |
| Over about 6'2" | About 24 to 25 inches, or a little more |
The angle of your knees when you sit on the edge of the bed is the best guide to the right height. Your knees should be bent at about 90 degrees, level with your hips, with your feet flat on the floor.
If your knees sit well above or below that angle and it feels awkward to sit down or stand up, keep adjusting until it feels natural.
The taller you are, the harder it is to get up from a low bed. Likewise, the shorter you are, the more a tall bed feels like a climb. Use your own sitting knee height as the target, not the average.
Some heavier sleepers find it harder to get onto a tall bed, and also sink further into the mattress when they sit, so the height they feel is lower than the height they measure. Test the height sitting on the edge, and choose a mattress with firm support so the edge holds you up. Turmerry's 12-inch Bigg+ Natural Latex Mattress is made for sleepers over about 230 lbs.
Young children usually do best on a low bed they can climb into by themselves. As we get older, many of us find a bed that's too low or too high harder to use. Many older adults prefer a bed where they can sit with their feet flat and stand up without a big push, which is the same edge test, just more important.
If a health condition, an injury or surgery affects how you move, the right bed height can make getting in and out of bed easier. Because everyone's needs are different, ask your doctor or an occupational therapist what height suits you, then choose a base with adjustable legs so you can match it.
If you share the bed, your partner's height matters too.
You probably aren't the same height, so you may need to compromise. Do the edge test together, and if the difference is large, set the bed to suit whoever finds getting up harder. A small step stool on one side can help the shorter partner on a taller bed.
A tall, traditional bed can overwhelm a minimal, modern room, and a very low bed can look lost in a large, formal one. Choose a height that suits your bedroom's style as well as your body.
Room size matters too. A tall bed takes up more visual space in a small room, but it gives you storage underneath, which a small apartment may need. A low bed makes the room feel bigger, but you'll need storage elsewhere.
Some situations call for a little more thought. These are comfort and convenience guidelines, not medical advice.
A low bed lets a child climb in and out on their own. A slim mattress on a low frame keeps the top of the bed close to the floor; the 7-inch Organic Kids Mattress works well here.
Check the maximum mattress thickness on the bed's label. On a top bunk, the guardrails should rise at least 5 inches above the top of the mattress, and children under 6 shouldn't sleep up top. A topper counts toward the thickness.
Use the edge test, and choose a base with adjustable legs so you can fine-tune the height later. If you have mobility needs, ask your doctor or an occupational therapist what height works best for you.
The easiest height for moving to and from a wheelchair, or for a caregiver helping someone, differs from person to person. An occupational therapist can help you set it; adjustable legs make it easy to match.
A taller bed, around 24 to 25 inches or a little more, keeps your knees from rising above your hips when you sit. A thicker mattress or longer legs are the simplest ways to get there.
If you don't know who'll sleep there, aim for the middle of the range, roughly 20 to 23 inches, which suits most adults.
To predict your bed height before you buy, add the height of the surface your mattress sits on, the mattress thickness and any topper. Here are some examples using Turmerry bases, mattresses and toppers. They're approximate, so measure once the bed is set up.
| Setup | Base | Mattress | Topper | About this high |
|---|---|---|---|---|
| Low and minimal | Wooden Bed Frame (about 13" tall overall) | 10" | None | Up to about 23" |
| Taller, with storage underneath | Platform Base, all four 3" leg sections (deck a little over 12") | 10" | 3" | A little over 25" |
| Lower everyday bed | Platform Base, two leg sections (deck a little over 6") | 12" | None | A little over 18" |
| Adjustable, full legs | A2, A3 or A4 adjustable base: 4" profile + 12" legs = 16" | 10" | None | About 26" |
| Adjustable, one leg section removed | A2, A3 or A4: 4" profile + 9" legs = 13" | 10" | None | About 23" |
| Kid's room | Platform Base, two leg sections | 7" | None | A little over 13" |
On the Wooden Bed Frame, the mattress sits down on slats inside the frame, so the finished height is usually a little less than the frame height plus the mattress. On the Platform Base and adjustable bases, the mattress sits on top of the deck, so the sum is closer to the real number.
Going from a 7-inch to a 12-inch mattress raises your bed by 5 inches, so it's worth choosing the mattress and the base together. Our 8-inch vs. 10-inch mattress guide compares two common thicknesses.
A topper adds its full thickness to your bed. A 10-inch mattress with a 3-inch topper is 13 inches tall, which also means your fitted sheets need a deeper pocket. Turmerry's latex toppers come in 2, 3 and 4 inch options; our topper thickness guide helps you choose.
A bed frame or base is the lowest part of the bed. It lifts the mattress off the floor and supports it. Frame types vary a lot in height, so it helps to know roughly where each one puts you before you buy. Our guide to bed frame types covers support and style in more detail.
Platform beds look modern, sit low to the ground and have a built-in solid or slatted deck, so they don't need a box spring. Some, like Turmerry's Platform Base, have stackable legs so you can choose a lower or taller setup.

An adjustable bed frame raises the head and foot of the bed with a remote, so you can sit up to read or watch TV, or lie flat to sleep. It's a comfort feature: if you're buying one for a health reason, ask your doctor which positions suit you. Turmerry's adjustable bases, the A2, A3 and A4, have a 4-inch profile and 12-inch stackable legs, so you can remove leg sections for a lower bed. Our adjustable bed sizes guide compares them.

Traditional beds have a classic design with a headboard, footboard and side rails. Many are built to hold a box spring or foundation on the rails, which lifts the bed to an average or taller height. For a latex mattress, use close slats or a solid foundation instead of a box spring.

Antique beds have a vintage design with carved wood or detailed metalwork. They often have a tall profile and sit well above the ground, and older beds may have been made for mattress sizes that differ slightly from today's, so measure carefully.

Upholstered beds have frames padded and covered with fabric or leather, often with a soft headboard to lean on. They usually sit lower and closer to the ground.

Futons have a sofa-like design that folds out into a bed. Most have a low profile and work well in small rooms, studios and guest rooms.

Canopy and poster beds have four tall posts that can hold a canopy or curtains. They make the bed the focal point of the room and give it a romantic, luxurious look. Their mattress height varies by design, so check the height of the deck or rails as well as the posts.
If your bed is too low or too high, you can usually fix it without buying a whole new bed:
Don't add a box spring to raise a latex mattress, and don't put it straight on the floor to lower it. Turmerry's mattress warranty says "using an improper foundation, such as a box spring, or placing the mattress directly on the floor, will void the warranty." Our guides on whether you need a box spring and putting a mattress on the floor explain why.
The best bed height is the one that lets you sit on the edge with your feet flat and your knees about level with your hips, which for most adults is somewhere around 16 to 25 inches to the top of the mattress. Add up your base, mattress and topper before you buy, and choose a base with adjustable legs if you want room to fine-tune. Our bed frame size chart helps you plan the rest of the room.
Turmerry's latex mattresses come in 7, 10 and 12 inch builds (plus the 11-inch Latex Hybrid). Most are separate layers inside a zippered organic cotton cover, so you can unzip it, see the layers and swap one if the feel isn't right. Every mattress comes with a 120-night trial (try it for at least 30 nights), and most orders ship the same business day from Charlotte, NC, with free shipping in the contiguous US.
Quite a lot: your mattress is often a third to half of your total bed height. Going from a 7-inch to a 12-inch mattress raises the top of your bed by 5 inches, so a thicker mattress pairs well with a lower frame and a thinner one with a taller frame. Thickness also changes how much cushioning you feel and how deep your fitted sheets need to be. Our mattress thickness guide explains how to choose.
Sturdy furniture risers rated for your bed's weight add a few inches under the frame's legs. On a base with stackable legs, like Turmerry's Platform Base or the A2, A3 and A4 adjustable bases, you can add a 3-inch leg section. A thicker mattress or a 2 to 4 inch topper also raises the sleeping surface. For a Turmerry latex mattress, skip the box spring: the warranty says using one voids it.
There's no single right number. Many people find a bed easiest to get in and out of when they can sit on the edge with their feet flat on the floor and their knees about level with their hips; for most adults that's somewhere around 16 to 25 inches to the top of the mattress. If you have mobility needs, ask your doctor or an occupational therapist what height suits you, and choose a base with adjustable legs so you can fine-tune it.
Take a measuring tape and start measuring from the floor to the top of the mattress. Repeat this task from various
different points of the bed to account for any unevenness in the surface. Additionally, make sure you include
components like a box spring/mattress foundation/mattress topper if you have them in your bed.
SHOPPING FOR A NEW MATTRESS?
Choose 7, 10 or 12 inches and swap layers to change the feel. 120-night trial, free pillows with every mattress.
$719.20 $899.00From. Code BF20 is added at checkout.
$719.20 $899.00From, with BF20
Get exclusive offers by email
Sale alerts and new sleep guides. Unsubscribe anytime.
7 Zone Organic Latex Mattress$719.20
7 Zone Organic Latex Mattress Topper$84.15
Organic Waterproof Mattress Protector$50.15
Organic Latex Pillow$83.30 Starting prices. Sale codes BF20 and BF15 are added at checkout.
Early Access Black Friday Sale: up to 20% offCode added at checkout
Shop the saleRelated blog posts:
Disclaimer: What is said in this article has been referenced from multiple sources and is intended only for educational and informational purposes. Please note that no content in this article is a substitute for professional advice from a qualified doctor or healthcare provider. Always consult an experienced doctor with any concerns you may have regarding a health condition or treatment, and never disregard any medical suggestions or delay in seeking treatment because of something you read here.
To pay using pre-tax HSA/FSA funds, select Truemed at checkout.
For HSA/FSA reimbursement, pay with any method and look for Truemed on the confirmation screen.
Truemed is for qualified customers. Learn more at truemed.com/disclosures.
You're on the list!
We'll email you when this item is back in stock.
Notify me when available
Enter your email and we'll let you know when this item is back in stock.
We don't share your email with anybody